pwman

SUBDIRS = src doc

# generated automatically by aclocal 1.14 -*- Autoconf -*-

# Copyright (C) 1996-2013 Free Software Foundation, Inc.

# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
m4_ifndef([AC_AUTOCONF_VERSION],
  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
[m4_warning([this file was generated for autoconf 2.69.
You have another version of autoconf.  It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])

# Copyright (C) 2002-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
[am__api_version='1.14'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version.  Point them to the right macro.
m4_if([$1], [1.14], [],
      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])

# _AM_AUTOCONF_VERSION(VERSION)
# -----------------------------
# aclocal traces this macro to find the Autoconf version.
# This is a private macro too.  Using m4_define simplifies
# the logic in aclocal, which can simply ignore this definition.
m4_define([_AM_AUTOCONF_VERSION], [])

# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.14])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])

# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory.  The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run.  This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
#    fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
#    fails if $ac_aux_dir is absolute,
#    fails when called from a subdirectory in a VPATH build with
#          a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir.  In an in-source build this is usually
# harmless because $srcdir is '.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
#   MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH.  The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.

AC_DEFUN([AM_AUX_DIR_EXPAND],
[dnl Rely on autoconf to set up CDPATH properly.
AC_PREREQ([2.50])dnl
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])

# AM_CONDITIONAL                                            -*- Autoconf -*-

# Copyright (C) 1997-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ([2.52])dnl
 m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
  $1_TRUE=
  $1_FALSE='#'
else
  $1_TRUE='#'
  $1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
  AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])

# Copyright (C) 1999-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.


# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery.  Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...


# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl

m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                    [depcc="$$1"   am_compiler_list=])

AC_CACHE_CHECK([dependency style of $depcc],
               [am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
  # We make a subdir and do the tests there.  Otherwise we can end up
  # making bogus files that we don't know about and never remove.  For
  # instance it was reported that on HP-UX the gcc test will end up
  # making a dummy file named 'D' -- because '-MD' means "put the output
  # in D".
  rm -rf conftest.dir
  mkdir conftest.dir
  # Copy depcomp to subdir because otherwise we won't find it if we're
  # using a relative directory.
  cp "$am_depcomp" conftest.dir
  cd conftest.dir
  # We will build objects and dependencies in a subdirectory because
  # it helps to detect inapplicable dependency modes.  For instance
  # both Tru64's cc and ICC support -MD to output dependencies as a
  # side effect of compilation, but ICC will put the dependencies in
  # the current directory while Tru64 will put them in the object
  # directory.
  mkdir sub

  am_cv_$1_dependencies_compiler_type=none
  if test "$am_compiler_list" = ""; then
     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
  fi
  am__universal=false
  m4_case([$1], [CC],
    [case " $depcc " in #(
     *\ -arch\ *\ -arch\ *) am__universal=true ;;
     esac],
    [CXX],
    [case " $depcc " in #(
     *\ -arch\ *\ -arch\ *) am__universal=true ;;
     esac])

  for depmode in $am_compiler_list; do
    # Setup a source with many dependencies, because some compilers
    # like to wrap large dependency lists on column 80 (with \), and
    # we should not choose a depcomp mode which is confused by this.
    #
    # We need to recreate these files for each test, as the compiler may
    # overwrite some of them when testing with obscure command lines.
    # This happens at least with the AIX C compiler.
    : > sub/conftest.c
    for i in 1 2 3 4 5 6; do
      echo '#include "conftst'$i'.h"' >> sub/conftest.c
      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
      # Solaris 10 /bin/sh.
      echo '/* dummy */' > sub/conftst$i.h
    done
    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf

    # We check with '-c' and '-o' for the sake of the "dashmstdout"
    # mode.  It turns out that the SunPro C++ compiler does not properly
    # handle '-M -o', and we need to detect this.  Also, some Intel
    # versions had trouble with output in subdirs.
    am__obj=sub/conftest.${OBJEXT-o}
    am__minus_obj="-o $am__obj"
    case $depmode in
    gcc)
      # This depmode causes a compiler race in universal mode.
      test "$am__universal" = false || continue
      ;;
    nosideeffect)
      # After this tag, mechanisms are not by side-effect, so they'll
      # only be used when explicitly requested.
      if test "x$enable_dependency_tracking" = xyes; then
	continue
      else
	break
      fi
      ;;
    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
      # This compiler won't grok '-c -o', but also, the minuso test has
      # not run yet.  These depmodes are late enough in the game, and
      # so weak that their functioning should not be impacted.
      am__obj=conftest.${OBJEXT-o}
      am__minus_obj=
      ;;
    none) break ;;
    esac
    if depmode=$depmode \
       source=sub/conftest.c object=$am__obj \
       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
         >/dev/null 2>conftest.err &&
       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
      # icc doesn't choke on unknown options, it will just issue warnings
      # or remarks (even with -Werror).  So we grep stderr for any message
      # that says an option was ignored or not supported.
      # When given -MP, icc 7.0 and 7.1 complain thusly:
      #   icc: Command line warning: ignoring option '-M'; no argument required
      # The diagnosis changed in icc 8.0:
      #   icc: Command line remark: option '-MP' not supported
      if (grep 'ignoring option' conftest.err ||
          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
        am_cv_$1_dependencies_compiler_type=$depmode
        break
      fi
    fi
  done

  cd ..
  rm -rf conftest.dir
else
  am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
  test "x$enable_dependency_tracking" != xno \
  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])


# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])


# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE([dependency-tracking], [dnl
AS_HELP_STRING(
  [--enable-dependency-tracking],
  [do not reject slow dependency extractors])
AS_HELP_STRING(
  [--disable-dependency-tracking],
  [speeds up one-time build])])
if test "x$enable_dependency_tracking" != xno; then
  am_depcomp="$ac_aux_dir/depcomp"
  AMDEPBACKSLASH='\'
  am__nodep='_no'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])dnl
_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
AC_SUBST([am__nodep])dnl
_AM_SUBST_NOTMAKE([am__nodep])dnl
])

# Generate code to set up dependency tracking.              -*- Autoconf -*-

# Copyright (C) 1999-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.


# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[{
  # Older Autoconf quotes --file arguments for eval, but not when files
  # are listed without --file.  Let's play safe and only enable the eval
  # if we detect the quoting.
  case $CONFIG_FILES in
  *\'*) eval set x "$CONFIG_FILES" ;;
  *)   set x $CONFIG_FILES ;;
  esac
  shift
  for mf
  do
    # Strip MF so we end up with the name of the file.
    mf=`echo "$mf" | sed -e 's/:.*$//'`
    # Check whether this is an Automake generated Makefile or not.
    # We used to match only the files named 'Makefile.in', but
    # some people rename them; so instead we look at the file content.
    # Grep'ing the first line is not enough: some people post-process
    # each Makefile.in and add a new line on top of each file to say so.
    # Grep'ing the whole file is not good either: AIX grep has a line
    # limit of 2048, but all sed's we know have understand at least 4000.
    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
      dirpart=`AS_DIRNAME("$mf")`
    else
      continue
    fi
    # Extract the definition of DEPDIR, am__include, and am__quote
    # from the Makefile without running 'make'.
    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
    test -z "$DEPDIR" && continue
    am__include=`sed -n 's/^am__include = //p' < "$mf"`
    test -z "$am__include" && continue
    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
    # Find all dependency output files, they are included files with
    # $(DEPDIR) in their names.  We invoke sed twice because it is the
    # simplest approach to changing $(DEPDIR) to its actual value in the
    # expansion.
    for file in `sed -n "
      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
      # Make sure the directory exists.
      test -f "$dirpart/$file" && continue
      fdir=`AS_DIRNAME(["$file"])`
      AS_MKDIR_P([$dirpart/$fdir])
      # echo "creating $dirpart/$file"
      echo '# dummy' > "$dirpart/$file"
    done
  done
}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS


# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled.  FIXME.  This creates each '.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])

# Do all the work for Automake.                             -*- Autoconf -*-

# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This macro actually does too much.  Some checks are only needed if
# your package does certain things.  But this isn't really a big deal.

dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
m4_define([AC_PROG_CC],
m4_defn([AC_PROG_CC])
[_AM_PROG_CC_C_O
])

# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out.  PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition.  After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.65])dnl
dnl Autoconf wants to disallow AM_ names.  We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
if test "`cd $srcdir && pwd`" != "`pwd`"; then
  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
  # is not polluted with repeated "-I."
  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
  # test to see if srcdir already configured
  if test -f $srcdir/config.status; then
    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
  fi
fi

# test whether we have cygpath
if test -z "$CYGPATH_W"; then
  if (cygpath --version) >/dev/null 2>/dev/null; then
    CYGPATH_W='cygpath -w'
  else
    CYGPATH_W=echo
  fi
fi
AC_SUBST([CYGPATH_W])

# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[AC_DIAGNOSE([obsolete],
             [$0: two- and three-arguments forms are deprecated.])
m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
 AC_SUBST([PACKAGE], [$1])dnl
 AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
m4_if(
  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
  [ok:ok],,
  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
 AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
 AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl

_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
 AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl

# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
AM_MISSING_PROG([AUTOCONF], [autoconf])
AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
AM_MISSING_PROG([AUTOHEADER], [autoheader])
AM_MISSING_PROG([MAKEINFO], [makeinfo])
AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
# For better backward compatibility.  To be removed once Automake 1.9.x
# dies out for good.  For more background, see:
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
# We need awk for the "check" target.  The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
			     [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
		  [_AM_DEPENDENCIES([CC])],
		  [m4_define([AC_PROG_CC],
			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
		  [_AM_DEPENDENCIES([CXX])],
		  [m4_define([AC_PROG_CXX],
			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
		  [_AM_DEPENDENCIES([OBJC])],
		  [m4_define([AC_PROG_OBJC],
			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
		  [_AM_DEPENDENCIES([OBJCXX])],
		  [m4_define([AC_PROG_OBJCXX],
			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
AC_REQUIRE([AM_SILENT_RULES])dnl
dnl The testsuite driver may need to know about EXEEXT, so add the
dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl

# POSIX will say in a future version that running "rm -f" with no argument
# is OK; and we want to be able to make that assumption in our Makefile
# recipes.  So use an aggressive probe to check that the usage we want is
# actually supported "in the wild" to an acceptable degree.
# See automake bug#10828.
# To make any issue more visible, cause the running configure to be aborted
# by default if the 'rm' program in use doesn't match our expectations; the
# user can still override this though.
if rm -f && rm -fr && rm -rf; then : OK; else
  cat >&2 <<'END'
Oops!

Your 'rm' program seems unable to run without file operands specified
on the command line, even when the '-f' option is present.  This is contrary
to the behaviour of most rm programs out there, and not conforming with
the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>

Please tell bug-automake@gnu.org about your system, including the value
of your $PATH and any error possibly output before this message.  This
can help us improve future automake versions.

END
  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
    echo 'Configuration will proceed anyway, since you have set the' >&2
    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
    echo >&2
  else
    cat >&2 <<'END'
Aborting the configuration process, to ensure you take notice of the issue.

You can download and install GNU coreutils to get an 'rm' implementation
that behaves properly: <http://www.gnu.org/software/coreutils/>.

If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
to "yes", and re-run configure.

END
    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
  fi
fi])

dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
dnl mangled by Autoconf and run in a shell conditional statement.
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])

# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated.  The stamp files are numbered to have different names.

# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
  case $_am_header in
    $_am_arg | $_am_arg:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
if test x"${install_sh}" != xset; then
  case $am_aux_dir in
  *\ * | *\	*)
    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
  *)
    install_sh="\${SHELL} $am_aux_dir/install-sh"
  esac
fi
AC_SUBST([install_sh])])

# Copyright (C) 2003-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# Check whether the underlying file-system supports filenames
# with a leading dot.  For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
  am__leading_dot=.
else
  am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])

# Check to see how 'make' treats includes.	            -*- Autoconf -*-

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
	@echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# Ignore all kinds of additional output from 'make'.
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
  am__include=include
  am__quote=
  _am_result=GNU
  ;;
esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
   echo '.include "confinc"' > confmf
   case `$am_make -s -f confmf 2> /dev/null` in #(
   *the\ am__doit\ target*)
     am__include=.include
     am__quote="\""
     _am_result=BSD
     ;;
   esac
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])

# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-

# Copyright (C) 1997-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])

# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it is modern enough.
# If it is, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
if test x"${MISSING+set}" != xset; then
  case $am_aux_dir in
  *\ * | *\	*)
    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
  *)
    MISSING="\${SHELL} $am_aux_dir/missing" ;;
  esac
fi
# Use eval to expand $SHELL
if eval "$MISSING --is-lightweight"; then
  am_missing_run="$MISSING "
else
  am_missing_run=
  AC_MSG_WARN(['missing' script is too old or missing])
fi
])

# Helper functions for option handling.                     -*- Autoconf -*-

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])

# _AM_SET_OPTION(NAME)
# --------------------
# Set option NAME.  Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), [1])])

# _AM_SET_OPTIONS(OPTIONS)
# ------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])

# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])

# Copyright (C) 1999-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_PROG_CC_C_O
# ---------------
# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
# to automatically call this.
AC_DEFUN([_AM_PROG_CC_C_O],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([compile])dnl
AC_LANG_PUSH([C])dnl
AC_CACHE_CHECK(
  [whether $CC understands -c and -o together],
  [am_cv_prog_cc_c_o],
  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
  # Make sure it works both with $CC and with simple cc.
  # Following AC_PROG_CC_C_O, we do the test twice because some
  # compilers refuse to overwrite an existing .o file with -o,
  # though they will create one.
  am_cv_prog_cc_c_o=yes
  for am_i in 1 2; do
    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
         && test -f conftest2.$ac_objext; then
      : OK
    else
      am_cv_prog_cc_c_o=no
      break
    fi
  done
  rm -f core conftest*
  unset am_i])
if test "$am_cv_prog_cc_c_o" != yes; then
   # Losing compiler, so override with the script.
   # FIXME: It is wrong to rewrite CC.
   # But if we don't then we get into trouble of one sort or another.
   # A longer-term fix would be to have automake use am__CC in this case,
   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
   CC="$am_aux_dir/compile $CC"
fi
AC_LANG_POP([C])])

# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_RUN_LOG(COMMAND)
# -------------------
# Run COMMAND, save the exit status in ac_status, and log it.
# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
AC_DEFUN([AM_RUN_LOG],
[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
   (exit $ac_status); }])

# Check to make sure that the build environment is sane.    -*- Autoconf -*-

# Copyright (C) 1996-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Reject unsafe characters in $srcdir or the absolute working directory
# name.  Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
  *[[\\\"\#\$\&\'\`$am_lf]]*)
    AC_MSG_ERROR([unsafe absolute working directory name]);;
esac
case $srcdir in
  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
esac

# Do 'set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   am_has_slept=no
   for am_try in 1 2; do
     echo "timestamp, slept: $am_has_slept" > conftest.file
     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
     if test "$[*]" = "X"; then
	# -L didn't work.
	set X `ls -t "$srcdir/configure" conftest.file`
     fi
     if test "$[*]" != "X $srcdir/configure conftest.file" \
	&& test "$[*]" != "X conftest.file $srcdir/configure"; then

	# If neither matched, then we have a broken ls.  This can happen
	# if, for instance, CONFIG_SHELL is bash and it inherits a
	# broken ls alias from the environment.  This has actually
	# happened.  Such a system could not be considered "sane".
	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
  alias in your environment])
     fi
     if test "$[2]" = conftest.file || test $am_try -eq 2; then
       break
     fi
     # Just in case.
     sleep 1
     am_has_slept=yes
   done
   test "$[2]" = conftest.file
   )
then
   # Ok.
   :
else
   AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT([yes])
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
  ( sleep 1 ) &
  am_sleep_pid=$!
fi
AC_CONFIG_COMMANDS_PRE(
  [AC_MSG_CHECKING([that generated files are newer than configure])
   if test -n "$am_sleep_pid"; then
     # Hide warnings about reused PIDs.
     wait $am_sleep_pid 2>/dev/null
   fi
   AC_MSG_RESULT([done])])
rm -f conftest.file
])

# Copyright (C) 2009-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_SILENT_RULES([DEFAULT])
# --------------------------
# Enable less verbose build rules; with the default set to DEFAULT
# ("yes" being less verbose, "no" or empty being verbose).
AC_DEFUN([AM_SILENT_RULES],
[AC_ARG_ENABLE([silent-rules], [dnl
AS_HELP_STRING(
  [--enable-silent-rules],
  [less verbose build output (undo: "make V=1")])
AS_HELP_STRING(
  [--disable-silent-rules],
  [verbose build output (undo: "make V=0")])dnl
])
case $enable_silent_rules in @%:@ (((
  yes) AM_DEFAULT_VERBOSITY=0;;
   no) AM_DEFAULT_VERBOSITY=1;;
    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
esac
dnl
dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
dnl do not support nested variable expansions.
dnl See automake bug#9928 and bug#10237.
am_make=${MAKE-make}
AC_CACHE_CHECK([whether $am_make supports nested variables],
   [am_cv_make_support_nested_variables],
   [if AS_ECHO([['TRUE=$(BAR$(V))
BAR0=false
BAR1=true
V=1
am__doit:
	@$(TRUE)
.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
  am_cv_make_support_nested_variables=yes
else
  am_cv_make_support_nested_variables=no
fi])
if test $am_cv_make_support_nested_variables = yes; then
  dnl Using '$V' instead of '$(V)' breaks IRIX make.
  AM_V='$(V)'
  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
else
  AM_V=$AM_DEFAULT_VERBOSITY
  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
fi
AC_SUBST([AM_V])dnl
AM_SUBST_NOTMAKE([AM_V])dnl
AC_SUBST([AM_DEFAULT_V])dnl
AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
AM_BACKSLASH='\'
AC_SUBST([AM_BACKSLASH])dnl
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor 'install' (even GNU) is that you can't
# specify the program used to strip binaries.  This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in "make install-strip", and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip".  However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the 'STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
if test "$cross_compiling" != no; then
  AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])

# Copyright (C) 2006-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])

# AM_SUBST_NOTMAKE(VARIABLE)
# --------------------------
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])

# Check how to create a tarball.                            -*- Autoconf -*-

# Copyright (C) 2004-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of 'v7', 'ustar', or 'pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
#     tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
#     $(am__untar) < result.tar
#
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility.  Yes, it's still used
# in the wild :-(  We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])

# We'll loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'

m4_if([$1], [v7],
  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],

  [m4_case([$1],
    [ustar],
     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
      # There is notably a 21 bits limit for the UID and the GID.  In fact,
      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
      # and bug#13588).
      am_max_uid=2097151 # 2^21 - 1
      am_max_gid=$am_max_uid
      # The $UID and $GID variables are not portable, so we need to resort
      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
      # below are definitely unexpected, so allow the users to see them
      # (that is, avoid stderr redirection).
      am_uid=`id -u || echo unknown`
      am_gid=`id -g || echo unknown`
      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
      if test $am_uid -le $am_max_uid; then
         AC_MSG_RESULT([yes])
      else
         AC_MSG_RESULT([no])
         _am_tools=none
      fi
      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
      if test $am_gid -le $am_max_gid; then
         AC_MSG_RESULT([yes])
      else
        AC_MSG_RESULT([no])
        _am_tools=none
      fi],

  [pax],
    [],

  [m4_fatal([Unknown tar format])])

  AC_MSG_CHECKING([how to create a $1 tar archive])

  # Go ahead even if we have the value already cached.  We do so because we
  # need to set the values for the 'am__tar' and 'am__untar' variables.
  _am_tools=${am_cv_prog_tar_$1-$_am_tools}

  for _am_tool in $_am_tools; do
    case $_am_tool in
    gnutar)
      for _am_tar in tar gnutar gtar; do
        AM_RUN_LOG([$_am_tar --version]) && break
      done
      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
      am__untar="$_am_tar -xf -"
      ;;
    plaintar)
      # Must skip GNU tar: if it does not support --format= it doesn't create
      # ustar tarball either.
      (tar --version) >/dev/null 2>&1 && continue
      am__tar='tar chf - "$$tardir"'
      am__tar_='tar chf - "$tardir"'
      am__untar='tar xf -'
      ;;
    pax)
      am__tar='pax -L -x $1 -w "$$tardir"'
      am__tar_='pax -L -x $1 -w "$tardir"'
      am__untar='pax -r'
      ;;
    cpio)
      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
      am__untar='cpio -i -H $1 -d'
      ;;
    none)
      am__tar=false
      am__tar_=false
      am__untar=false
      ;;
    esac

    # If the value was cached, stop now.  We just wanted to have am__tar
    # and am__untar set.
    test -n "${am_cv_prog_tar_$1}" && break

    # tar/untar a dummy directory, and stop if the command works.
    rm -rf conftest.dir
    mkdir conftest.dir
    echo GrepMe > conftest.dir/file
    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
    rm -rf conftest.dir
    if test -s conftest.tar; then
      AM_RUN_LOG([$am__untar <conftest.tar])
      AM_RUN_LOG([cat conftest.dir/file])
      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
    fi
  done
  rm -rf conftest.dir

  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
  AC_MSG_RESULT([$am_cv_prog_tar_$1])])

AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR

#!/bin/sh

aclocal \
&& automake --gnu --add-missing \
&& autoconf 

/* config.h.in.  Generated from configure.ac by autoheader.  */

/* Define to 1 if you have the `drand48' function. */
#undef HAVE_DRAND48

/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H

/* Define to 1 if you have the <linux/termios.h> header file. */
#undef HAVE_LINUX_TERMIOS_H

/* Define to 1 if you have the <locale.h> header file. */
#undef HAVE_LOCALE_H

/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H

/* Define to 1 if you have the <ncurses.h> header file. */
#undef HAVE_NCURSES_H

/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H

/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H

/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H

/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H

/* Define to 1 if you have the <sys/ioctl.h> header file. */
#undef HAVE_SYS_IOCTL_H

/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H

/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H

/* Define to 1 if you have the <termios.h> header file. */
#undef HAVE_TERMIOS_H

/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H

/* Name of package */
#undef PACKAGE

/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT

/* Define to the full name of this package. */
#undef PACKAGE_NAME

/* Define to the full name and version of this package. */
#undef PACKAGE_STRING

/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME

/* Define to the home page for this package. */
#undef PACKAGE_URL

/* Define to the version of this package. */
#undef PACKAGE_VERSION

/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS

/* Version number of package */
#undef VERSION

/* Define to `unsigned int' if <sys/types.h> does not define. */
#undef size_t

# Process this file with autoconf to produce a configure script.
AC_INIT(pwman, 0.4.4)
AC_CONFIG_SRCDIR([src/ui.c])
AM_INIT_AUTOMAKE
AC_CONFIG_HEADERS([config.h])
AC_CONFIG_FILES([pwman.spec])

# Checks for programs.
AC_PROG_CC
AC_SEARCH_LIBS([strerror],[cposix])

AC_CHECK_HEADERS(unistd.h locale.h termios.h linux/termios.h sys/ioctl.h string.h)

AC_CHECK_FUNCS(drand48)
AC_CHECK_LIB(c, strcasestr, CFLAGS="$CFLAGS -DHAVE_STRCASESTR" )
# Checks for libraries.
dnl -------------------
dnl ncurses detection
dnl -------------------

curses_loc=/usr
AC_ARG_WITH(curses, [  --with-ncurses=PATH	Where ncurses is installed ],
        [if test $withval != yes; then
                curses_loc=$withval
        fi
        if test x$curses_loc != x/usr; then
                LDFLAGS="-L${curses_loc}/lib $LDFLAGS"
                CPPFLAGS="$CPPFLAGS -I${curses_loc}/include"
        fi])

AC_CHECK_LIB(curses, initscr,
        [LIBS="$LIBS -lcurses"
        if test x$curses_loc = x/usr -a -d /usr/include/ncurses; then
                CPPFLAGS="$CPPFLAGS -I/usr/include/ncurses"
        fi
        AC_CHECK_HEADERS(ncurses.h)],
	[ echo "*************************************************************"
	  echo "  ncurses not found. "
	  echo "  Set path to ncurses install with --with-ncurses"
	  echo "*************************************************************"
	  exit])

dnl 
dnl Checks for libxml2
dnl
AC_ARG_WITH(libxml2,
            [  --with-libxml2=PFX   Prefix where libxml is installed ],
            libxml2_loc="$withval", libxml2_loc="")
	    
if test x$libxml2_loc != x ; then
     if test x${XML2_CONFIG+set} != xset ; then
        XML2_CONFIG=$libxml2_loc/bin/xml2-config
     fi
fi

AC_PATH_PROG(XML2_CONFIG, xml2-config, no)

if test "$XML2_CONFIG" = "no" ; then
	echo "*************************************************************"
	echo "  libxml2 not found. "
	echo "  It may not be installed or may be in a installed in a "
	echo "  location other than /usr"
	echo "  Set path to libxml2 install with --with-libxml2"
	echo "*************************************************************"
	exit
else
	XML_CFLAGS=`$XML2_CONFIG $libxml2_args --cflags`
	XML_LIBS=`$XML2_CONFIG $libxml2_args --libs`
fi
	

LIBS="$LIBS $XML_LIBS";
CFLAGS="$CFLAGS $XML_CFLAGS";

dnl 
dnl Debugging
dnl
AC_ARG_WITH(debug,
            [  --with-debug   Turn on Debugging ],
	    [ LIBS="$LIBS -ggdb"
	      CFLAGS="$CFLAGS -DDEBUG" 
	      echo "* Debugging is On *" ],
	      echo "* Debugging is Off *")
	    
AC_SUBST(CFLAGS)
AC_SUBST(CPPFLAGS)
AC_SUBST(LDFLAGS)

dnl --------------------------
dnl end of xml detection
dnl --------------------------

AC_SUBST(CFLAGS)
AC_SUBST(CPPFLAGS)
AC_SUBST(LDFLAGS)

# Checks for header files.
AC_HEADER_STDC
AC_CHECK_HEADERS([string.h])

# Checks for typedefs, structures, and compiler characteristics.
AC_TYPE_SIZE_T

# Checks for library functions.

AC_CONFIG_FILES([Makefile src/Makefile doc/Makefile])
AC_OUTPUT 

pwman (0.4.4-1) unstable; urgency=low
  * Add "Locate" support to easily see where in the tree an item lives
 -- Nick Burch <gagravarr@users.sourceforge.net>  Tue, 15 Feb 2011 22:24:00 +0000

pwman (0.4.3-1) unstable; urgency=low
  * Improved handling of spaces and tabs
  * Common exporter to tidy code
  * Various bug fixes and compiler warning fixes
 -- Nick Burch <gagravarr@users.sourceforge.net>  Sat, 29 Jan 2011 23:07:00 +0000

pwman (0.4.0-1) unstable; urgency=low
  * Initial release 
 -- Nick Burch <gagravarr@users.sourceforge.net>  Thu, 03 Dec 2009 16:36:09 +0000

Source: pwman
Section: unknown
Priority: extra
Maintainer: Nick Burch <gagravarr@users.sourceforge.net>
Build-Depends: debhelper (>= 7), autotools-dev, libxml2-dev, libncurses5-dev
Depends: gnupg, libxml2, libncureses5
Standards-Version: 3.7.3
Homepage: http://pwman.sourceforge.net/

Package: pwman
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: A password manager which uses gpg to safeguard your data
 PWMan is a password manager which uses gpg encryption to safeguard your data.
 Some code has been taken from Jaakko Heinonen's abook.

		    GNU GENERAL PUBLIC LICENSE
		       Version 2, June 1991

 Copyright (C) 1989, 1991 Free Software Foundation, Inc.
     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

			    Preamble

  The licenses for most software are designed to take away your
freedom to share and change it.  By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users.  This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it.  (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.)  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.

  To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have.  You must make sure that they, too, receive or can get the
source code.  And you must show them these terms so they know their
rights.

  We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.

  Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software.  If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.

  Finally, any free program is threatened constantly by software
patents.  We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary.  To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.

  The precise terms and conditions for copying, distribution and
modification follow.
 
		    GNU GENERAL PUBLIC LICENSE
   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

  0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License.  The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language.  (Hereinafter, translation is included without limitation in
the term "modification".)  Each licensee is addressed as "you".

Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope.  The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.

  1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.

You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.

  2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:

    a) You must cause the modified files to carry prominent notices
    stating that you changed the files and the date of any change.

    b) You must cause any work that you distribute or publish, that in
    whole or in part contains or is derived from the Program or any
    part thereof, to be licensed as a whole at no charge to all third
    parties under the terms of this License.

    c) If the modified program normally reads commands interactively
    when run, you must cause it, when started running for such
    interactive use in the most ordinary way, to print or display an
    announcement including an appropriate copyright notice and a
    notice that there is no warranty (or else, saying that you provide
    a warranty) and that users may redistribute the program under
    these conditions, and telling the user how to view a copy of this
    License.  (Exception: if the Program itself is interactive but
    does not normally print such an announcement, your work based on
    the Program is not required to print an announcement.)
 
These requirements apply to the modified work as a whole.  If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works.  But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.

In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.

  3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:

    a) Accompany it with the complete corresponding machine-readable
    source code, which must be distributed under the terms of Sections
    1 and 2 above on a medium customarily used for software interchange; or,

    b) Accompany it with a written offer, valid for at least three
    years, to give any third party, for a charge no more than your
    cost of physically performing source distribution, a complete
    machine-readable copy of the corresponding source code, to be
    distributed under the terms of Sections 1 and 2 above on a medium
    customarily used for software interchange; or,

    c) Accompany it with the information you received as to the offer
    to distribute corresponding source code.  (This alternative is
    allowed only for noncommercial distribution and only if you
    received the program in object code or executable form with such
    an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for
making modifications to it.  For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable.  However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.

If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
 
  4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License.  Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.

  5. You are not required to accept this License, since you have not
signed it.  However, nothing else grants you permission to modify or
distribute the Program or its derivative works.  These actions are
prohibited by law if you do not accept this License.  Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.

  6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions.  You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.

  7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all.  For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.

It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices.  Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.

This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
 
  8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded.  In such case, this License incorporates
the limitation as if written in the body of this License.

  9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

Each version is given a distinguishing version number.  If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation.  If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.

  10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission.  For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this.  Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.

			    NO WARRANTY

  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.

  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.

		     END OF TERMS AND CONDITIONS
 
	    How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA


Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:

    Gnomovision version 69, Copyright (C) year  name of author
    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary.  Here is a sample; alter the names:

  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
  `Gnomovision' (which makes passes at compilers) written by James Hacker.

  <signature of Ty Coon>, 1 April 1989
  Ty Coon, President of Vice

This General Public License does not permit incorporating your program into
proprietary programs.  If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library.  If this is what you want to do, use the GNU Library General
Public License instead of this License.

#!/usr/bin/make -f
# -*- makefile -*-
# Sample debian/rules that uses debhelper.
# This file was originally written by Joey Hess and Craig Small.
# As a special exception, when this file is copied by dh-make into a
# dh-make output file, you may use that output file without restriction.
# This special exception was added by Craig Small in version 0.37 of dh-make.

# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1


# These are used for cross-compiling and for saving the configure script
# from having to guess our platform (since we know it already)
DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
ifneq ($(DEB_HOST_GNU_TYPE),$(DEB_BUILD_GNU_TYPE))
CROSS= --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE)
else
CROSS= --build $(DEB_BUILD_GNU_TYPE)
endif



config.status: configure
	dh_testdir
	# Add here commands to configure the package.
ifneq "$(wildcard /usr/share/misc/config.sub)" ""
	cp -f /usr/share/misc/config.sub config.sub
endif
ifneq "$(wildcard /usr/share/misc/config.guess)" ""
	cp -f /usr/share/misc/config.guess config.guess
endif
	./configure $(CROSS) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info CFLAGS="$(CFLAGS)" LDFLAGS="-Wl,-z,defs"


build: build-stamp

build-stamp:  config.status 
	dh_testdir

	# Add here commands to compile the package.
	$(MAKE)
	#docbook-to-man debian/pwman.sgml > pwman.1

	touch $@

clean: 
	dh_testdir
	dh_testroot
	rm -f build-stamp 

	# Add here commands to clean up after the build process.
	[ ! -f Makefile ] || $(MAKE) distclean
	rm -f config.sub config.guess

	dh_clean 

install: build
	dh_testdir
	dh_testroot
	dh_clean -k 
	dh_installdirs

	# Add here commands to install the package into debian/pwman.
	$(MAKE) DESTDIR=$(CURDIR)/debian/pwman install


# Build architecture-independent files here.
binary-indep: build install
# We have nothing to do by default.

# Build architecture-dependent files here.
binary-arch: build install
	dh_testdir
	dh_testroot
	dh_installchangelogs ChangeLog
	dh_installdocs
	dh_installexamples
#	dh_install
#	dh_installmenu
#	dh_installdebconf	
#	dh_installlogrotate
#	dh_installemacsen
#	dh_installpam
#	dh_installmime
#	dh_python
#	dh_installinit
#	dh_installcron
#	dh_installinfo
	dh_installman
	dh_link
	dh_strip
	dh_compress
	dh_fixperms
#	dh_perl
#	dh_makeshlibs
	dh_installdeb
	dh_shlibdeps
	dh_gencontrol
	dh_md5sums
	dh_builddeb

binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install 

EXTRA_DIST = pwman.1

install-data-local:
	        $(mkinstalldirs) $(DESTDIR)$(mandir)/man1
		$(INSTALL_DATA) $(srcdir)/pwman.1 $(DESTDIR)$(mandir)/man1/

uninstall-local:
	        -rm -f $(DESTDIR)$(mandir)/man1/pwman.1

#! /bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission.  M.I.T. makes no representations about the
# suitability of this software for any purpose.  It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.  It can only install one file at a time, a restriction
# shared with many OS's install programs.


# set DOITPROG to echo to test this script

# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"


# put in absolute paths if you don't have them in your path; or use env. vars.

mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"

transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""

while [ x"$1" != x ]; do
    case $1 in
	-c) instcmd="$cpprog"
	    shift
	    continue;;

	-d) dir_arg=true
	    shift
	    continue;;

	-m) chmodcmd="$chmodprog $2"
	    shift
	    shift
	    continue;;

	-o) chowncmd="$chownprog $2"
	    shift
	    shift
	    continue;;

	-g) chgrpcmd="$chgrpprog $2"
	    shift
	    shift
	    continue;;

	-s) stripcmd="$stripprog"
	    shift
	    continue;;

	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
	    shift
	    continue;;

	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
	    shift
	    continue;;

	*)  if [ x"$src" = x ]
	    then
		src=$1
	    else
		# this colon is to work around a 386BSD /bin/sh bug
		:
		dst=$1
	    fi
	    shift
	    continue;;
    esac
done

if [ x"$src" = x ]
then
	echo "install:	no input file specified"
	exit 1
else
	true
fi

if [ x"$dir_arg" != x ]; then
	dst=$src
	src=""
	
	if [ -d $dst ]; then
		instcmd=:
	else
		instcmd=mkdir
	fi
else

# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad 
# if $src (and thus $dsttmp) contains '*'.

	if [ -f $src -o -d $src ]
	then
		true
	else
		echo "install:  $src does not exist"
		exit 1
	fi
	
	if [ x"$dst" = x ]
	then
		echo "install:	no destination specified"
		exit 1
	else
		true
	fi

# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic

	if [ -d $dst ]
	then
		dst="$dst"/`basename $src`
	else
		true
	fi
fi

## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`

# Make sure that the destination directory exists.
#  this part is taken from Noah Friedman's mkinstalldirs script

# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='	
'
IFS="${IFS-${defaultIFS}}"

oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"

pathcomp=''

while [ $# -ne 0 ] ; do
	pathcomp="${pathcomp}${1}"
	shift

	if [ ! -d "${pathcomp}" ] ;
        then
		$mkdirprog "${pathcomp}"
	else
		true
	fi

	pathcomp="${pathcomp}/"
done
fi

if [ x"$dir_arg" != x ]
then
	$doit $instcmd $dst &&

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else

# If we're going to rename the final executable, determine the name now.

	if [ x"$transformarg" = x ] 
	then
		dstfile=`basename $dst`
	else
		dstfile=`basename $dst $transformbasename | 
			sed $transformarg`$transformbasename
	fi

# don't allow the sed command to completely eliminate the filename

	if [ x"$dstfile" = x ] 
	then
		dstfile=`basename $dst`
	else
		true
	fi

# Make a temp file name in the proper directory.

	dsttmp=$dstdir/#inst.$$#

# Move or copy the file name to the temp name

	$doit $instcmd $src $dsttmp &&

	trap "rm -f ${dsttmp}" 0 &&

# and set any options; do chmod last to preserve setuid bits

# If any of these fail, we abort the whole thing.  If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.

	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&

# Now rename the file to the real destination.

	$doit $rmcmd -f $dstdir/$dstfile &&
	$doit $mvcmd $dsttmp $dstdir/$dstfile 

fi &&


exit 0

#! /bin/sh
# Common stub for a few missing GNU programs while installing.
# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.

if test $# -eq 0; then
  echo 1>&2 "Try \`$0 --help' for more information"
  exit 1
fi

case "$1" in

  -h|--h|--he|--hel|--help)
    echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...

Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.

Options:
  -h, --help      display this help and exit
  -v, --version   output version information and exit

Supported PROGRAM values:
  aclocal      touch file \`aclocal.m4'
  autoconf     touch file \`configure'
  autoheader   touch file \`config.h.in'
  automake     touch all \`Makefile.in' files
  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
  flex         create \`lex.yy.c', if possible, from existing .c
  lex          create \`lex.yy.c', if possible, from existing .c
  makeinfo     touch the output file
  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
    ;;

  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
    echo "missing - GNU libit 0.0"
    ;;

  -*)
    echo 1>&2 "$0: Unknown \`$1' option"
    echo 1>&2 "Try \`$0 --help' for more information"
    exit 1
    ;;

  aclocal)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified \`acinclude.m4' or \`configure.in'.  You might want
         to install the \`Automake' and \`Perl' packages.  Grab them from
         any GNU archive site."
    touch aclocal.m4
    ;;

  autoconf)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified \`configure.in'.  You might want to install the
         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
         archive site."
    touch configure
    ;;

  autoheader)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified \`acconfig.h' or \`configure.in'.  You might want
         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
         from any GNU archive site."
    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
    test -z "$files" && files="config.h"
    touch_files=
    for f in $files; do
      case "$f" in
      *:*) touch_files="$touch_files "`echo "$f" |
				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
      *) touch_files="$touch_files $f.in";;
      esac
    done
    touch $touch_files
    ;;

  automake)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
         You might want to install the \`Automake' and \`Perl' packages.
         Grab them from any GNU archive site."
    find . -type f -name Makefile.am -print |
	   sed 's/\.am$/.in/' |
	   while read f; do touch "$f"; done
    ;;

  bison|yacc)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified a \`.y' file.  You may need the \`Bison' package
         in order for those modifications to take effect.  You can get
         \`Bison' from any GNU archive site."
    rm -f y.tab.c y.tab.h
    if [ $# -ne 1 ]; then
        eval LASTARG="\${$#}"
	case "$LASTARG" in
	*.y)
	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
	    if [ -f "$SRCFILE" ]; then
	         cp "$SRCFILE" y.tab.c
	    fi
	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
	    if [ -f "$SRCFILE" ]; then
	         cp "$SRCFILE" y.tab.h
	    fi
	  ;;
	esac
    fi
    if [ ! -f y.tab.h ]; then
	echo >y.tab.h
    fi
    if [ ! -f y.tab.c ]; then
	echo 'main() { return 0; }' >y.tab.c
    fi
    ;;

  lex|flex)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified a \`.l' file.  You may need the \`Flex' package
         in order for those modifications to take effect.  You can get
         \`Flex' from any GNU archive site."
    rm -f lex.yy.c
    if [ $# -ne 1 ]; then
        eval LASTARG="\${$#}"
	case "$LASTARG" in
	*.l)
	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
	    if [ -f "$SRCFILE" ]; then
	         cp "$SRCFILE" lex.yy.c
	    fi
	  ;;
	esac
    fi
    if [ ! -f lex.yy.c ]; then
	echo 'main() { return 0; }' >lex.yy.c
    fi
    ;;

  makeinfo)
    echo 1>&2 "\
WARNING: \`$1' is missing on your system.  You should only need it if
         you modified a \`.texi' or \`.texinfo' file, or any other file
         indirectly affecting the aspect of the manual.  The spurious
         call might also be the consequence of using a buggy \`make' (AIX,
         DU, IRIX).  You might want to install the \`Texinfo' package or
         the \`GNU make' package.  Grab either from any GNU archive site."
    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
    if test -z "$file"; then
      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
    fi
    touch $file
    ;;

  *)
    echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
         system.  You might have modified some files without having the
         proper tools for further handling them.  Check the \`README' file,
         it often tells you about the needed prerequirements for installing
         this package.  You may also peek at any GNU archive site, in case
         some other package would contain this missing \`$1' program."
    exit 1
    ;;
esac

exit 0

#! /bin/sh
# mkinstalldirs --- make directory hierarchy
# Author: Noah Friedman <friedman@prep.ai.mit.edu>
# Created: 1993-05-16
# Public domain

# $Id: mkinstalldirs,v 1.1 2002-04-06 17:52:03 ivan_kelly Exp $

errstatus=0

for file
do
   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
   shift

   pathcomp=
   for d
   do
     pathcomp="$pathcomp$d"
     case "$pathcomp" in
       -* ) pathcomp=./$pathcomp ;;
     esac

     if test ! -d "$pathcomp"; then
        echo "mkdir $pathcomp"

        mkdir "$pathcomp" || lasterr=$?

        if test ! -d "$pathcomp"; then
  	  errstatus=$lasterr
        fi
     fi

     pathcomp="$pathcomp/"
   done
done

exit $errstatus

# mkinstalldirs ends here

# Note - pwman.spec is autogenerated from pwman.spec.in
#  Make sure you edit the latter and not the former!

Summary: A password manager which uses gpg encryption to safeguard your data.
Name: pwman
Version: @VERSION@
Release: 1
License: GPL
Group: Applications/System
URL: http://pwman.sourceforge.net/
Source: http://prdownloads.sourceforge.net/pwman/pwman-%{version}.tar.gz
Requires: libxml2 ncurses gnupg
BuildRequires: libxml2-devel ncurses-devel

%description
PWMan is a password manager which uses gpg encryption to safeguard your data.
Some code has been taken from Jaakko Heinonen's abook.

%prep
%setup

%build
%configure
make

%install
rm -rf ${RPM_BUILD_ROOT}
make DESTDIR=${RPM_BUILD_ROOT} install

%clean
rm -rf ${RPM_BUILD_ROOT}

%files
%defattr(-,root,root)
%doc AUTHORS ChangeLog COPYING INSTALL NEWS README TODO
%doc %{_mandir}/man1/pwman.1*
%{_bindir}/pwman
%{_bindir}/convert_pwdb
%{_bindir}/pwdb2csv

%changelog
* Thu Dec 3 2006 Nick Burch <gagravarr@users.sourceforge.net>
- Initial RPM build

actions.o: actions.c ui.h /usr/include/curses.h \
 /usr/include/ncurses_dll.h /usr/include/stdio.h \
 /usr/include/features.h /usr/include/sys/cdefs.h \
 /usr/include/gnu/stubs.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h \
 /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \
 /usr/include/bits/sched.h /usr/include/libio.h \
 /usr/include/_G_config.h /usr/include/wchar.h \
 /usr/include/bits/wchar.h /usr/include/gconv.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h \
 /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \
 /usr/include/unctrl.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h \
 /usr/include/signal.h /usr/include/bits/sigset.h \
 /usr/include/bits/signum.h /usr/include/time.h \
 /usr/include/bits/siginfo.h /usr/include/bits/wordsize.h \
 /usr/include/bits/sigaction.h /usr/include/bits/sigcontext.h \
 /usr/include/asm/sigcontext.h /usr/include/bits/sigstack.h \
 /usr/include/bits/sigthread.h /usr/include/ctype.h \
 /usr/include/endian.h /usr/include/bits/endian.h pwman.h \
 /usr/include/string.h /usr/include/bits/string.h \
 /usr/include/bits/string2.h /usr/include/stdlib.h ../config.h \
 /usr/include/bits/time.h
actions.c :
ui.h :
/usr/include/curses.h :
/usr/include/ncurses_dll.h :
/usr/include/stdio.h :
/usr/include/features.h :
/usr/include/sys/cdefs.h :
/usr/include/gnu/stubs.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h :
/usr/include/bits/types.h :
/usr/include/bits/pthreadtypes.h :
/usr/include/bits/sched.h :
/usr/include/libio.h :
/usr/include/_G_config.h :
/usr/include/wchar.h :
/usr/include/bits/wchar.h :
/usr/include/gconv.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h :
/usr/include/bits/stdio_lim.h :
/usr/include/bits/stdio.h :
/usr/include/unctrl.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h :
/usr/include/signal.h :
/usr/include/bits/sigset.h :
/usr/include/bits/signum.h :
/usr/include/time.h :
/usr/include/bits/siginfo.h :
/usr/include/bits/wordsize.h :
/usr/include/bits/sigaction.h :
/usr/include/bits/sigcontext.h :
/usr/include/asm/sigcontext.h :
/usr/include/bits/sigstack.h :
/usr/include/bits/sigthread.h :
/usr/include/ctype.h :
/usr/include/endian.h :
/usr/include/bits/endian.h :
pwman.h :
/usr/include/string.h :
/usr/include/bits/string.h :
/usr/include/bits/string2.h :
/usr/include/stdlib.h :
../config.h :
/usr/include/bits/time.h :

conff.o: conff.c /usr/include/stdio.h /usr/include/features.h \
 /usr/include/sys/cdefs.h /usr/include/gnu/stubs.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h \
 /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \
 /usr/include/bits/sched.h /usr/include/libio.h \
 /usr/include/_G_config.h /usr/include/wchar.h \
 /usr/include/bits/wchar.h /usr/include/gconv.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h \
 /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \
 /usr/include/sys/stat.h /usr/include/bits/stat.h \
 /usr/include/unistd.h /usr/include/bits/posix_opt.h \
 /usr/include/bits/confname.h /usr/include/getopt.h \
 /usr/include/string.h /usr/include/bits/string.h \
 /usr/include/bits/string2.h /usr/include/endian.h \
 /usr/include/bits/endian.h /usr/include/stdlib.h misc.h ../config.h \
 conff.h /usr/include/sys/types.h /usr/include/time.h \
 /usr/include/sys/select.h /usr/include/bits/select.h \
 /usr/include/bits/sigset.h /usr/include/bits/time.h \
 /usr/include/sys/sysmacros.h /usr/include/alloca.h \
 /usr/include/assert.h
conff.c :
/usr/include/stdio.h :
/usr/include/features.h :
/usr/include/sys/cdefs.h :
/usr/include/gnu/stubs.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h :
/usr/include/bits/types.h :
/usr/include/bits/pthreadtypes.h :
/usr/include/bits/sched.h :
/usr/include/libio.h :
/usr/include/_G_config.h :
/usr/include/wchar.h :
/usr/include/bits/wchar.h :
/usr/include/gconv.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h :
/usr/include/bits/stdio_lim.h :
/usr/include/bits/stdio.h :
/usr/include/sys/stat.h :
/usr/include/bits/stat.h :
/usr/include/unistd.h :
/usr/include/bits/posix_opt.h :
/usr/include/bits/confname.h :
/usr/include/getopt.h :
/usr/include/string.h :
/usr/include/bits/string.h :
/usr/include/bits/string2.h :
/usr/include/endian.h :
/usr/include/bits/endian.h :
/usr/include/stdlib.h :
misc.h :
../config.h :
conff.h :
/usr/include/sys/types.h :
/usr/include/time.h :
/usr/include/sys/select.h :
/usr/include/bits/select.h :
/usr/include/bits/sigset.h :
/usr/include/bits/time.h :
/usr/include/sys/sysmacros.h :
/usr/include/alloca.h :
/usr/include/assert.h :

edit.o: edit.c ui.h /usr/include/curses.h /usr/include/ncurses_dll.h \
 /usr/include/stdio.h /usr/include/features.h /usr/include/sys/cdefs.h \
 /usr/include/gnu/stubs.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h \
 /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \
 /usr/include/bits/sched.h /usr/include/libio.h \
 /usr/include/_G_config.h /usr/include/wchar.h \
 /usr/include/bits/wchar.h /usr/include/gconv.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h \
 /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \
 /usr/include/unctrl.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h pwman.h \
 /usr/include/menu.h /usr/include/eti.h /usr/include/form.h \
 /usr/include/panel.h /usr/include/string.h /usr/include/bits/string.h \
 /usr/include/bits/string2.h /usr/include/endian.h \
 /usr/include/bits/endian.h /usr/include/stdlib.h \
 /usr/include/gnome-xml/parser.h /usr/include/gnome-xml/tree.h \
 /usr/include/gnome-xml/valid.h /usr/include/gnome-xml/xmlIO.h \
 /usr/include/gnome-xml/encoding.h /usr/include/gnome-xml/entities.h \
 ../config.h
edit.c :
ui.h :
/usr/include/curses.h :
/usr/include/ncurses_dll.h :
/usr/include/stdio.h :
/usr/include/features.h :
/usr/include/sys/cdefs.h :
/usr/include/gnu/stubs.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h :
/usr/include/bits/types.h :
/usr/include/bits/pthreadtypes.h :
/usr/include/bits/sched.h :
/usr/include/libio.h :
/usr/include/_G_config.h :
/usr/include/wchar.h :
/usr/include/bits/wchar.h :
/usr/include/gconv.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h :
/usr/include/bits/stdio_lim.h :
/usr/include/bits/stdio.h :
/usr/include/unctrl.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h :
pwman.h :
/usr/include/menu.h :
/usr/include/eti.h :
/usr/include/form.h :
/usr/include/panel.h :
/usr/include/string.h :
/usr/include/bits/string.h :
/usr/include/bits/string2.h :
/usr/include/endian.h :
/usr/include/bits/endian.h :
/usr/include/stdlib.h :
/usr/include/gnome-xml/parser.h :
/usr/include/gnome-xml/tree.h :
/usr/include/gnome-xml/valid.h :
/usr/include/gnome-xml/xmlIO.h :
/usr/include/gnome-xml/encoding.h :
/usr/include/gnome-xml/entities.h :
../config.h :

launch.o: launch.c pwman.h /usr/include/curses.h \
 /usr/include/ncurses_dll.h /usr/include/stdio.h \
 /usr/include/features.h /usr/include/sys/cdefs.h \
 /usr/include/gnu/stubs.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h \
 /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \
 /usr/include/bits/sched.h /usr/include/libio.h \
 /usr/include/_G_config.h /usr/include/wchar.h \
 /usr/include/bits/wchar.h /usr/include/gconv.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h \
 /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \
 /usr/include/unctrl.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h \
 /usr/include/string.h /usr/include/bits/string.h \
 /usr/include/bits/string2.h /usr/include/endian.h \
 /usr/include/bits/endian.h /usr/include/stdlib.h ../config.h \
 /usr/include/time.h /usr/include/bits/time.h /usr/include/unistd.h \
 /usr/include/bits/posix_opt.h /usr/include/bits/confname.h \
 /usr/include/getopt.h /usr/include/sys/types.h \
 /usr/include/sys/select.h /usr/include/bits/select.h \
 /usr/include/bits/sigset.h /usr/include/sys/sysmacros.h \
 /usr/include/errno.h /usr/include/bits/errno.h \
 /usr/include/linux/errno.h /usr/include/asm/errno.h
launch.c :
pwman.h :
/usr/include/curses.h :
/usr/include/ncurses_dll.h :
/usr/include/stdio.h :
/usr/include/features.h :
/usr/include/sys/cdefs.h :
/usr/include/gnu/stubs.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h :
/usr/include/bits/types.h :
/usr/include/bits/pthreadtypes.h :
/usr/include/bits/sched.h :
/usr/include/libio.h :
/usr/include/_G_config.h :
/usr/include/wchar.h :
/usr/include/bits/wchar.h :
/usr/include/gconv.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h :
/usr/include/bits/stdio_lim.h :
/usr/include/bits/stdio.h :
/usr/include/unctrl.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h :
/usr/include/string.h :
/usr/include/bits/string.h :
/usr/include/bits/string2.h :
/usr/include/endian.h :
/usr/include/bits/endian.h :
/usr/include/stdlib.h :
../config.h :
/usr/include/time.h :
/usr/include/bits/time.h :
/usr/include/unistd.h :
/usr/include/bits/posix_opt.h :
/usr/include/bits/confname.h :
/usr/include/getopt.h :
/usr/include/sys/types.h :
/usr/include/sys/select.h :
/usr/include/bits/select.h :
/usr/include/bits/sigset.h :
/usr/include/sys/sysmacros.h :
/usr/include/errno.h :
/usr/include/bits/errno.h :
/usr/include/linux/errno.h :
/usr/include/asm/errno.h :

list.o: list.c pwminder.h /usr/include/curses.h \
 /usr/include/ncurses_dll.h /usr/include/stdio.h \
 /usr/include/features.h /usr/include/sys/cdefs.h \
 /usr/include/gnu/stubs.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h \
 /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \
 /usr/include/bits/sched.h /usr/include/libio.h \
 /usr/include/_G_config.h /usr/include/wchar.h \
 /usr/include/bits/wchar.h /usr/include/gconv.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h \
 /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \
 /usr/include/unctrl.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h \
 /usr/include/menu.h /usr/include/eti.h /usr/include/form.h \
 /usr/include/panel.h /usr/include/string.h /usr/include/bits/string.h \
 /usr/include/bits/string2.h /usr/include/endian.h \
 /usr/include/bits/endian.h /usr/include/stdlib.h \
 /usr/include/gnome-xml/parser.h /usr/include/gnome-xml/tree.h \
 /usr/include/gnome-xml/valid.h /usr/include/gnome-xml/xmlIO.h \
 /usr/include/gnome-xml/encoding.h /usr/include/gnome-xml/entities.h \
 ../config.h list.h
list.c :
pwminder.h :
/usr/include/curses.h :
/usr/include/ncurses_dll.h :
/usr/include/stdio.h :
/usr/include/features.h :
/usr/include/sys/cdefs.h :
/usr/include/gnu/stubs.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h :
/usr/include/bits/types.h :
/usr/include/bits/pthreadtypes.h :
/usr/include/bits/sched.h :
/usr/include/libio.h :
/usr/include/_G_config.h :
/usr/include/wchar.h :
/usr/include/bits/wchar.h :
/usr/include/gconv.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h :
/usr/include/bits/stdio_lim.h :
/usr/include/bits/stdio.h :
/usr/include/unctrl.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h :
/usr/include/menu.h :
/usr/include/eti.h :
/usr/include/form.h :
/usr/include/panel.h :
/usr/include/string.h :
/usr/include/bits/string.h :
/usr/include/bits/string2.h :
/usr/include/endian.h :
/usr/include/bits/endian.h :
/usr/include/stdlib.h :
/usr/include/gnome-xml/parser.h :
/usr/include/gnome-xml/tree.h :
/usr/include/gnome-xml/valid.h :
/usr/include/gnome-xml/xmlIO.h :
/usr/include/gnome-xml/encoding.h :
/usr/include/gnome-xml/entities.h :
../config.h :
list.h :

options.o: options.c pwman.h /usr/include/curses.h \
 /usr/include/ncurses_dll.h /usr/include/stdio.h \
 /usr/include/features.h /usr/include/sys/cdefs.h \
 /usr/include/gnu/stubs.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h \
 /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \
 /usr/include/bits/sched.h /usr/include/libio.h \
 /usr/include/_G_config.h /usr/include/wchar.h \
 /usr/include/bits/wchar.h /usr/include/gconv.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h \
 /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \
 /usr/include/unctrl.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h \
 /usr/include/string.h /usr/include/bits/string.h \
 /usr/include/bits/string2.h /usr/include/endian.h \
 /usr/include/bits/endian.h /usr/include/stdlib.h ../config.h \
 /usr/include/time.h /usr/include/bits/time.h \
 /home/ikelly/sw/include/libxml2/libxml/tree.h \
 /home/ikelly/sw/include/libxml2/libxml/xmlversion.h \
 /home/ikelly/sw/include/libxml2/libxml/xmlmemory.h \
 /home/ikelly/sw/include/libxml2/libxml/threads.h \
 /home/ikelly/sw/include/libxml2/libxml/globals.h \
 /home/ikelly/sw/include/libxml2/libxml/parser.h \
 /home/ikelly/sw/include/libxml2/libxml/valid.h \
 /home/ikelly/sw/include/libxml2/libxml/list.h \
 /home/ikelly/sw/include/libxml2/libxml/entities.h \
 /home/ikelly/sw/include/libxml2/libxml/encoding.h \
 /usr/include/iconv.h /home/ikelly/sw/include/libxml2/libxml/xmlIO.h \
 /home/ikelly/sw/include/libxml2/libxml/xmlerror.h \
 /home/ikelly/sw/include/libxml2/libxml/SAX.h /usr/include/sys/types.h \
 /usr/include/sys/select.h /usr/include/bits/select.h \
 /usr/include/bits/sigset.h /usr/include/sys/sysmacros.h \
 /usr/include/alloca.h /home/ikelly/sw/include/libxml2/libxml/xlink.h
options.c :
pwman.h :
/usr/include/curses.h :
/usr/include/ncurses_dll.h :
/usr/include/stdio.h :
/usr/include/features.h :
/usr/include/sys/cdefs.h :
/usr/include/gnu/stubs.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h :
/usr/include/bits/types.h :
/usr/include/bits/pthreadtypes.h :
/usr/include/bits/sched.h :
/usr/include/libio.h :
/usr/include/_G_config.h :
/usr/include/wchar.h :
/usr/include/bits/wchar.h :
/usr/include/gconv.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h :
/usr/include/bits/stdio_lim.h :
/usr/include/bits/stdio.h :
/usr/include/unctrl.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h :
/usr/include/string.h :
/usr/include/bits/string.h :
/usr/include/bits/string2.h :
/usr/include/endian.h :
/usr/include/bits/endian.h :
/usr/include/stdlib.h :
../config.h :
/usr/include/time.h :
/usr/include/bits/time.h :
/home/ikelly/sw/include/libxml2/libxml/tree.h :
/home/ikelly/sw/include/libxml2/libxml/xmlversion.h :
/home/ikelly/sw/include/libxml2/libxml/xmlmemory.h :
/home/ikelly/sw/include/libxml2/libxml/threads.h :
/home/ikelly/sw/include/libxml2/libxml/globals.h :
/home/ikelly/sw/include/libxml2/libxml/parser.h :
/home/ikelly/sw/include/libxml2/libxml/valid.h :
/home/ikelly/sw/include/libxml2/libxml/list.h :
/home/ikelly/sw/include/libxml2/libxml/entities.h :
/home/ikelly/sw/include/libxml2/libxml/encoding.h :
/usr/include/iconv.h :
/home/ikelly/sw/include/libxml2/libxml/xmlIO.h :
/home/ikelly/sw/include/libxml2/libxml/xmlerror.h :
/home/ikelly/sw/include/libxml2/libxml/SAX.h :
/usr/include/sys/types.h :
/usr/include/sys/select.h :
/usr/include/bits/select.h :
/usr/include/bits/sigset.h :
/usr/include/sys/sysmacros.h :
/usr/include/alloca.h :
/home/ikelly/sw/include/libxml2/libxml/xlink.h :

pwlist.o: pwlist.c pwman.h /usr/include/curses.h \
 /usr/include/ncurses_dll.h /usr/include/stdio.h \
 /usr/include/features.h /usr/include/sys/cdefs.h \
 /usr/include/gnu/stubs.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h \
 /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \
 /usr/include/bits/sched.h /usr/include/libio.h \
 /usr/include/_G_config.h /usr/include/wchar.h \
 /usr/include/bits/wchar.h /usr/include/gconv.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h \
 /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \
 /usr/include/unctrl.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h \
 /usr/include/string.h /usr/include/bits/string.h \
 /usr/include/bits/string2.h /usr/include/endian.h \
 /usr/include/bits/endian.h /usr/include/stdlib.h ../config.h \
 /usr/include/time.h /usr/include/bits/time.h /usr/include/errno.h \
 /usr/include/bits/errno.h /usr/include/linux/errno.h \
 /usr/include/asm/errno.h /usr/include/unistd.h \
 /usr/include/bits/posix_opt.h /usr/include/bits/confname.h \
 /usr/include/getopt.h /home/ikelly/sw/include/libxml2/libxml/tree.h \
 /home/ikelly/sw/include/libxml2/libxml/xmlversion.h \
 /home/ikelly/sw/include/libxml2/libxml/xmlmemory.h \
 /home/ikelly/sw/include/libxml2/libxml/threads.h \
 /home/ikelly/sw/include/libxml2/libxml/globals.h \
 /home/ikelly/sw/include/libxml2/libxml/parser.h \
 /home/ikelly/sw/include/libxml2/libxml/valid.h \
 /home/ikelly/sw/include/libxml2/libxml/list.h \
 /home/ikelly/sw/include/libxml2/libxml/entities.h \
 /home/ikelly/sw/include/libxml2/libxml/encoding.h \
 /usr/include/iconv.h /home/ikelly/sw/include/libxml2/libxml/xmlIO.h \
 /home/ikelly/sw/include/libxml2/libxml/xmlerror.h \
 /home/ikelly/sw/include/libxml2/libxml/SAX.h /usr/include/sys/types.h \
 /usr/include/sys/select.h /usr/include/bits/select.h \
 /usr/include/bits/sigset.h /usr/include/sys/sysmacros.h \
 /usr/include/alloca.h /home/ikelly/sw/include/libxml2/libxml/xlink.h
pwlist.c :
pwman.h :
/usr/include/curses.h :
/usr/include/ncurses_dll.h :
/usr/include/stdio.h :
/usr/include/features.h :
/usr/include/sys/cdefs.h :
/usr/include/gnu/stubs.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h :
/usr/include/bits/types.h :
/usr/include/bits/pthreadtypes.h :
/usr/include/bits/sched.h :
/usr/include/libio.h :
/usr/include/_G_config.h :
/usr/include/wchar.h :
/usr/include/bits/wchar.h :
/usr/include/gconv.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h :
/usr/include/bits/stdio_lim.h :
/usr/include/bits/stdio.h :
/usr/include/unctrl.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h :
/usr/include/string.h :
/usr/include/bits/string.h :
/usr/include/bits/string2.h :
/usr/include/endian.h :
/usr/include/bits/endian.h :
/usr/include/stdlib.h :
../config.h :
/usr/include/time.h :
/usr/include/bits/time.h :
/usr/include/errno.h :
/usr/include/bits/errno.h :
/usr/include/linux/errno.h :
/usr/include/asm/errno.h :
/usr/include/unistd.h :
/usr/include/bits/posix_opt.h :
/usr/include/bits/confname.h :
/usr/include/getopt.h :
/home/ikelly/sw/include/libxml2/libxml/tree.h :
/home/ikelly/sw/include/libxml2/libxml/xmlversion.h :
/home/ikelly/sw/include/libxml2/libxml/xmlmemory.h :
/home/ikelly/sw/include/libxml2/libxml/threads.h :
/home/ikelly/sw/include/libxml2/libxml/globals.h :
/home/ikelly/sw/include/libxml2/libxml/parser.h :
/home/ikelly/sw/include/libxml2/libxml/valid.h :
/home/ikelly/sw/include/libxml2/libxml/list.h :
/home/ikelly/sw/include/libxml2/libxml/entities.h :
/home/ikelly/sw/include/libxml2/libxml/encoding.h :
/usr/include/iconv.h :
/home/ikelly/sw/include/libxml2/libxml/xmlIO.h :
/home/ikelly/sw/include/libxml2/libxml/xmlerror.h :
/home/ikelly/sw/include/libxml2/libxml/SAX.h :
/usr/include/sys/types.h :
/usr/include/sys/select.h :
/usr/include/bits/select.h :
/usr/include/bits/sigset.h :
/usr/include/sys/sysmacros.h :
/usr/include/alloca.h :
/home/ikelly/sw/include/libxml2/libxml/xlink.h :

pwman.o: pwman.c pwman.h /usr/include/curses.h \
 /usr/include/ncurses_dll.h /usr/include/stdio.h \
 /usr/include/features.h /usr/include/sys/cdefs.h \
 /usr/include/gnu/stubs.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h \
 /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \
 /usr/include/bits/sched.h /usr/include/libio.h \
 /usr/include/_G_config.h /usr/include/wchar.h \
 /usr/include/bits/wchar.h /usr/include/gconv.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h \
 /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \
 /usr/include/unctrl.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h \
 /usr/include/string.h /usr/include/bits/string.h \
 /usr/include/bits/string2.h /usr/include/endian.h \
 /usr/include/bits/endian.h /usr/include/stdlib.h ../config.h \
 /usr/include/time.h /usr/include/bits/time.h /usr/include/signal.h \
 /usr/include/bits/sigset.h /usr/include/bits/signum.h \
 /usr/include/bits/siginfo.h /usr/include/bits/wordsize.h \
 /usr/include/bits/sigaction.h /usr/include/bits/sigcontext.h \
 /usr/include/asm/sigcontext.h /usr/include/bits/sigstack.h \
 /usr/include/bits/sigthread.h /usr/include/unistd.h \
 /usr/include/bits/posix_opt.h /usr/include/bits/confname.h \
 /usr/include/getopt.h /usr/include/sys/types.h \
 /usr/include/sys/select.h /usr/include/bits/select.h \
 /usr/include/sys/sysmacros.h /usr/include/sys/stat.h \
 /usr/include/bits/stat.h /usr/include/fcntl.h \
 /usr/include/bits/fcntl.h
pwman.c :
pwman.h :
/usr/include/curses.h :
/usr/include/ncurses_dll.h :
/usr/include/stdio.h :
/usr/include/features.h :
/usr/include/sys/cdefs.h :
/usr/include/gnu/stubs.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h :
/usr/include/bits/types.h :
/usr/include/bits/pthreadtypes.h :
/usr/include/bits/sched.h :
/usr/include/libio.h :
/usr/include/_G_config.h :
/usr/include/wchar.h :
/usr/include/bits/wchar.h :
/usr/include/gconv.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h :
/usr/include/bits/stdio_lim.h :
/usr/include/bits/stdio.h :
/usr/include/unctrl.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h :
/usr/include/string.h :
/usr/include/bits/string.h :
/usr/include/bits/string2.h :
/usr/include/endian.h :
/usr/include/bits/endian.h :
/usr/include/stdlib.h :
../config.h :
/usr/include/time.h :
/usr/include/bits/time.h :
/usr/include/signal.h :
/usr/include/bits/sigset.h :
/usr/include/bits/signum.h :
/usr/include/bits/siginfo.h :
/usr/include/bits/wordsize.h :
/usr/include/bits/sigaction.h :
/usr/include/bits/sigcontext.h :
/usr/include/asm/sigcontext.h :
/usr/include/bits/sigstack.h :
/usr/include/bits/sigthread.h :
/usr/include/unistd.h :
/usr/include/bits/posix_opt.h :
/usr/include/bits/confname.h :
/usr/include/getopt.h :
/usr/include/sys/types.h :
/usr/include/sys/select.h :
/usr/include/bits/select.h :
/usr/include/sys/sysmacros.h :
/usr/include/sys/stat.h :
/usr/include/bits/stat.h :
/usr/include/fcntl.h :
/usr/include/bits/fcntl.h :

pwminder.o: pwminder.c pwminder.h /usr/include/curses.h \
 /usr/include/ncurses_dll.h /usr/include/stdio.h \
 /usr/include/features.h /usr/include/sys/cdefs.h \
 /usr/include/gnu/stubs.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h \
 /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \
 /usr/include/bits/sched.h /usr/include/libio.h \
 /usr/include/_G_config.h /usr/include/wchar.h \
 /usr/include/bits/wchar.h /usr/include/gconv.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h \
 /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \
 /usr/include/unctrl.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h \
 /usr/include/menu.h /usr/include/eti.h /usr/include/form.h \
 /usr/include/panel.h /usr/include/string.h /usr/include/bits/string.h \
 /usr/include/bits/string2.h /usr/include/endian.h \
 /usr/include/bits/endian.h /usr/include/stdlib.h \
 /usr/include/gnome-xml/parser.h /usr/include/gnome-xml/tree.h \
 /usr/include/gnome-xml/valid.h /usr/include/gnome-xml/xmlIO.h \
 /usr/include/gnome-xml/encoding.h /usr/include/gnome-xml/entities.h \
 ../config.h /usr/include/signal.h /usr/include/bits/sigset.h \
 /usr/include/bits/signum.h /usr/include/time.h \
 /usr/include/bits/siginfo.h /usr/include/bits/wordsize.h \
 /usr/include/bits/sigaction.h /usr/include/bits/sigcontext.h \
 /usr/include/asm/sigcontext.h /usr/include/bits/sigstack.h \
 /usr/include/bits/sigthread.h
pwminder.c :
pwminder.h :
/usr/include/curses.h :
/usr/include/ncurses_dll.h :
/usr/include/stdio.h :
/usr/include/features.h :
/usr/include/sys/cdefs.h :
/usr/include/gnu/stubs.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h :
/usr/include/bits/types.h :
/usr/include/bits/pthreadtypes.h :
/usr/include/bits/sched.h :
/usr/include/libio.h :
/usr/include/_G_config.h :
/usr/include/wchar.h :
/usr/include/bits/wchar.h :
/usr/include/gconv.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h :
/usr/include/bits/stdio_lim.h :
/usr/include/bits/stdio.h :
/usr/include/unctrl.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h :
/usr/include/menu.h :
/usr/include/eti.h :
/usr/include/form.h :
/usr/include/panel.h :
/usr/include/string.h :
/usr/include/bits/string.h :
/usr/include/bits/string2.h :
/usr/include/endian.h :
/usr/include/bits/endian.h :
/usr/include/stdlib.h :
/usr/include/gnome-xml/parser.h :
/usr/include/gnome-xml/tree.h :
/usr/include/gnome-xml/valid.h :
/usr/include/gnome-xml/xmlIO.h :
/usr/include/gnome-xml/encoding.h :
/usr/include/gnome-xml/entities.h :
../config.h :
/usr/include/signal.h :
/usr/include/bits/sigset.h :
/usr/include/bits/signum.h :
/usr/include/time.h :
/usr/include/bits/siginfo.h :
/usr/include/bits/wordsize.h :
/usr/include/bits/sigaction.h :
/usr/include/bits/sigcontext.h :
/usr/include/asm/sigcontext.h :
/usr/include/bits/sigstack.h :
/usr/include/bits/sigthread.h :

ui.o: ui.c pwman.h /usr/include/curses.h /usr/include/ncurses_dll.h \
 /usr/include/stdio.h /usr/include/features.h /usr/include/sys/cdefs.h \
 /usr/include/gnu/stubs.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h \
 /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \
 /usr/include/bits/sched.h /usr/include/libio.h \
 /usr/include/_G_config.h /usr/include/wchar.h \
 /usr/include/bits/wchar.h /usr/include/gconv.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h \
 /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \
 /usr/include/unctrl.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h \
 /usr/include/string.h /usr/include/bits/string.h \
 /usr/include/bits/string2.h /usr/include/endian.h \
 /usr/include/bits/endian.h /usr/include/stdlib.h ../config.h \
 /usr/include/time.h /usr/include/bits/time.h ui.h \
 /usr/include/signal.h /usr/include/bits/sigset.h \
 /usr/include/bits/signum.h /usr/include/bits/siginfo.h \
 /usr/include/bits/wordsize.h /usr/include/bits/sigaction.h \
 /usr/include/bits/sigcontext.h /usr/include/asm/sigcontext.h \
 /usr/include/bits/sigstack.h /usr/include/bits/sigthread.h \
 /usr/include/ctype.h /usr/include/termios.h \
 /usr/include/bits/termios.h /usr/include/sys/ttydefaults.h \
 /usr/include/sys/ioctl.h /usr/include/bits/ioctls.h \
 /usr/include/asm/ioctls.h /usr/include/asm/ioctl.h \
 /usr/include/bits/ioctl-types.h help.h
ui.c :
pwman.h :
/usr/include/curses.h :
/usr/include/ncurses_dll.h :
/usr/include/stdio.h :
/usr/include/features.h :
/usr/include/sys/cdefs.h :
/usr/include/gnu/stubs.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h :
/usr/include/bits/types.h :
/usr/include/bits/pthreadtypes.h :
/usr/include/bits/sched.h :
/usr/include/libio.h :
/usr/include/_G_config.h :
/usr/include/wchar.h :
/usr/include/bits/wchar.h :
/usr/include/gconv.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h :
/usr/include/bits/stdio_lim.h :
/usr/include/bits/stdio.h :
/usr/include/unctrl.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h :
/usr/include/string.h :
/usr/include/bits/string.h :
/usr/include/bits/string2.h :
/usr/include/endian.h :
/usr/include/bits/endian.h :
/usr/include/stdlib.h :
../config.h :
/usr/include/time.h :
/usr/include/bits/time.h :
ui.h :
/usr/include/signal.h :
/usr/include/bits/sigset.h :
/usr/include/bits/signum.h :
/usr/include/bits/siginfo.h :
/usr/include/bits/wordsize.h :
/usr/include/bits/sigaction.h :
/usr/include/bits/sigcontext.h :
/usr/include/asm/sigcontext.h :
/usr/include/bits/sigstack.h :
/usr/include/bits/sigthread.h :
/usr/include/ctype.h :
/usr/include/termios.h :
/usr/include/bits/termios.h :
/usr/include/sys/ttydefaults.h :
/usr/include/sys/ioctl.h :
/usr/include/bits/ioctls.h :
/usr/include/asm/ioctls.h :
/usr/include/asm/ioctl.h :
/usr/include/bits/ioctl-types.h :
help.h :

uilist.o: uilist.c ui.h /usr/include/curses.h \
 /usr/include/ncurses_dll.h /usr/include/stdio.h \
 /usr/include/features.h /usr/include/sys/cdefs.h \
 /usr/include/gnu/stubs.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h \
 /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \
 /usr/include/bits/sched.h /usr/include/libio.h \
 /usr/include/_G_config.h /usr/include/wchar.h \
 /usr/include/bits/wchar.h /usr/include/gconv.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h \
 /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \
 /usr/include/unctrl.h \
 /usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h \
 /usr/include/signal.h /usr/include/bits/sigset.h \
 /usr/include/bits/signum.h /usr/include/time.h \
 /usr/include/bits/siginfo.h /usr/include/bits/wordsize.h \
 /usr/include/bits/sigaction.h /usr/include/bits/sigcontext.h \
 /usr/include/asm/sigcontext.h /usr/include/bits/sigstack.h \
 /usr/include/bits/sigthread.h /usr/include/ctype.h \
 /usr/include/endian.h /usr/include/bits/endian.h pwman.h \
 /usr/include/string.h /usr/include/bits/string.h \
 /usr/include/bits/string2.h /usr/include/stdlib.h ../config.h \
 /usr/include/bits/time.h
uilist.c :
ui.h :
/usr/include/curses.h :
/usr/include/ncurses_dll.h :
/usr/include/stdio.h :
/usr/include/features.h :
/usr/include/sys/cdefs.h :
/usr/include/gnu/stubs.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stddef.h :
/usr/include/bits/types.h :
/usr/include/bits/pthreadtypes.h :
/usr/include/bits/sched.h :
/usr/include/libio.h :
/usr/include/_G_config.h :
/usr/include/wchar.h :
/usr/include/bits/wchar.h :
/usr/include/gconv.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdarg.h :
/usr/include/bits/stdio_lim.h :
/usr/include/bits/stdio.h :
/usr/include/unctrl.h :
/usr/lib/gcc-lib/i386-linux/2.95.4/include/stdbool.h :
/usr/include/signal.h :
/usr/include/bits/sigset.h :
/usr/include/bits/signum.h :
/usr/include/time.h :
/usr/include/bits/siginfo.h :
/usr/include/bits/wordsize.h :
/usr/include/bits/sigaction.h :
/usr/include/bits/sigcontext.h :
/usr/include/asm/sigcontext.h :
/usr/include/bits/sigstack.h :
/usr/include/bits/sigthread.h :
/usr/include/ctype.h :
/usr/include/endian.h :
/usr/include/bits/endian.h :
pwman.h :
/usr/include/string.h :
/usr/include/bits/string.h :
/usr/include/bits/string2.h :
/usr/include/stdlib.h :
../config.h :
/usr/include/bits/time.h :

AM_CPPFLAGS = -I$(top_srcdir) -I$(includedir) \
	  -DG_LOG_DOMAIN=\"pwman\" 
		
bin_PROGRAMS = pwman convert_pwdb pwdb2csv

pwman_SOURCES = actions.c filter.c gnupg.c gnupg.h help.h \
                launch.c misc.c options.c pwgen.c pwlist.c \
                pwman.c pwman.h search.c ui.c ui.h uilist.c

convert_pwdb_SOURCES = convert_pwdb.c

# This one isn't currently used: import_export.c
pwdb2csv_SOURCES = pwdb2csv.c 

timestamp